The short answer

In a heated room, refrigerant models are often the first type people compare. In a colder space, low-temperature performance matters more, so include desiccant models in the comparison. This is a starting point, not a universal rule: the operating range and instructions for the exact model decide whether it fits.

How a refrigerant model works

Room air passes over a cold coil. Water condenses into a tank or drain, and the air is warmed before it returns to the room. Collection usually falls as the room becomes cooler or drier, so check the stated test conditions and defrost behaviour.

How a desiccant model works

A moisture-attracting material removes water vapour and is regenerated with heat. The outgoing air can feel warmer and power use may be higher. Portable domestic models and larger ducted systems are different products, so compare only like with like. Condair: Desiccant and condensing dehumidifiers

Compare the exact models

Check the operating range and extraction test point first. Then compare rated watts, airflow, noise, drainage, weight and clearances. Do not use one temperature cut-off for every brand and model.

Include heat, power and drainage in the decision

A warmer outlet may help in one room and be uncomfortable in another. A lower wattage does not by itself mean a lower total drying cost. Use the running-cost calculator for the electricity cost and keep it separate from moisture-removal claims.

Know when the comparison is not enough

Neither technology can confirm that hidden layers are dry or make wet electrical equipment safe. For a temporary job, you can inspect the National Tool Hire dehumidifier range, but check the exact supplied model and manual before booking. National Tool Hire did not write or check this guide.